Hinge element

Job fair

By Wayne LennoxWayne Lennox

putteringapril1

Photo by Jacques Perrault

No comments

Here’s a simple method that I use to cut a hinge mortise—a task that can be tricky to do the traditional, chisel-only way. Position the hinge leaf on the surface and score the outline with a sharp utility knife. Remove the hinge and deepen the cuts; if you’re working with softwood, the utility knife should do, but for hardwood, you will need to use a sharp 3/4″ or 1″ chisel, positioned with the bevel toward the waste side. Then, insert a 1/2″ straight bit in your router and set its depth to the thickness of the hinge leaf. Rout out most of the waste, leaving a little spare wood next to the scored edges—it’s better to use a chisel to square up the corners and remove the remaining waste. You should now have a perfect fit for your hinge.


No comments

You need to be logged in or a registered user to leave a comment

Log in  |  Register

Tonight on Cottage Life

  • 06:00 pmCOTTAGE CHEESE
  • 06:30 pmWEEKEND RENO
  • 07:00 pmBUYING HAWAII
  • 07:30 pmMY RETREAT
  • 08:00 pmGEORGE CLARKE'S AMAZING SPACES
  • 09:00 pmBROJECTS
  • 09:30 pmDECKS, DOCKS, AND GAZEBOS
  • 10:00 pmCOLIN AND JUSTIN'S CABIN PRESSURE
  • 10:30 pmMY RETREAT
  • 11:00 pmBUYING HAWAII
  • 11:30 pmSELLING BIG
View Full Schedule

MOST POPULAR


Wayne Lennox