Here’s how to make your very own DIY beer caddy!
Using a 1×6 pine board, evenly measure out six spots for six bottles. Cut three equal boards the same length; these will be your holders and base for the caddy. Stack two boards on top of one another and use a two-and-a-half inch hole saw to create your bottle holders, drilling through both boards.
Using a 1×6, measure and cut the sides of your caddy; remember to leave room for your handle! Shape your sides as desired. Drill a hole at the top of each for your handle. Use rope, wood, pipe etc. Stain or paint all your pieces before gluing, screwing, or nailing together.
Add your favourite beer!